Device Settings for Mobile Number belongs to Category-A

1. Portal Setting
2. WAP Setting
3. GPRS Setting
3. MMS Setting


1. Portal Setting (Category A):
It enables to browse only CellOne WAP Portal (http://wap.cellone.in) which have unlimited contents like polytone, truetone, video tone, wallpaper, animation, theme, video, mp3 etc to download into your handset device . No charges on browsing through this setting but charge on download of GPRS contents will be implied.
Setting Name CelloneSouth_portal_m
Access Point Name celloneportal
Port 9201 for Wap 1 device
9401 for Wap 2device
Proxy IP 10.31.54.2
Authentication Normal
User Name ppp
Password ppp123
Home Page http://wap.cellone.in

Top

2. WAP Setting (Category A):
It enables to browse any site on internet by handset or Laptop or PC. Charge on browsing will be implied.

Setting Name CelloneSouth_wap_m
Access Point Name bsnlwap
Port 9201 for Wap 1 device
9401 for Wap 2 device
Proxy IP 10.31.54.2
Authentication Normal
User Name ppp
Password ppp123
Home Page http://wap.cellone.in

Top

3. GPRS Setting (Category A):
It enables to browse any site on internet by Laptop or PC through handset or datacard having BSNL SIM. Charge on browsing will be implied.

Setting Name CelloneSouth_gprs_m
Access Point Name bsnlsouth
User Name your mobile number ( 94xxxxxxxx )
Password your mobile number ( 94xxxxxxxx )

Top

4. MMS Setting (Category A):

Setting Name CelloneSouth_wap_m
Access Point Name bsnlmms
Port 9201 for Wap 1 device
9401 for Wap 2 device
Proxy IP 10.31.54.2
Authentication Normal
User Name ppp
Password ppp123
Home Page http://10.31.53.18/mms/

| 0 Comments

Steps to Install your modem (phone) to access MTNL GPRS

Install the necessary software (provided with your phone) in your system. Note do not connect the phone now. once the software is installed properly , plug in the USB cable with your mobile turned on. Now you can see that your system says " found new hardware ,install in progress". your computer will find the necessary modem drivers from CD and install it in your system. wait until your computer says the hardware is ready to use.

Once the above steps are finished follow as stated below...

| 0 Comments